HP Netserver LPr Installation Guide
Chapter 2 Controls, Indicators, and Ports
14
Rear View
Refer to Figure 2-3 on the next page.
•
The Management Port connector supports Integrated Remote Assistant
and links the NetServer to a console for real time monitoring and
diagnosis of system operation.
•
The Network Port consists of an RJ-45 connector supporting 10/100
BaseT Ethernet. It is the rear panel of a Network Interface Card in slot #
4 of the PCI expansion bus.
•
The Serial B Port is a standard serial port.
•
The Serial A Port is a standard serial port.
•
The Parallel Port is a standard parallel port.
•
The Mouse Port accepts a standard PS/2 mouse.
•
The Keyboard Port accepts a standard PS/2 keyboard.
•
The Monitor Port interfaces to a monitor with up to 1024x768x256
resolution, with a 60 to 70 Hz refresh rate. The NetServer LPr includes a
frame buffer of 1MB; it may be upgraded to 2 MB.
•
The Power Connector accepts a standard power cable to connect the
NetServer LPr with the site power supply.