HP Netserver LPr Installation Guide

Chapter 2 Controls, Indicators, and Ports

Figure 2-3. Rear Panel and Ports

Table 2-2. Rear Panel Indicator Definitions

Indicator Definition

Link LED

This LED goes on to indicate that both the

network adapter in the LPr and the network

switch are receiving power and that they are

properly connected.

Activity LED

This LED flashes to indicate data transfers

to/from the LPr network adapter. The rate of

flashes varies directly with network traffic.

100 mbps LED

This LED goes on to indicate that the LPr

network adapter is supporting transfers at the 100

mbps (million bits per second) rate. When off, the

LPR is working at 20 mbps.