Manualshelf

HP Netserver LPr Installation Guide

ManualsBrandsHP ManualsServerHP NetServer LH 3000
21222324252627282930
Chapter 3 Opening and Closing the HP NetServer LPr
21
Replace
1. When replacing the top cover, make sure that all cables and the system
board ejector levers are out of the way.
2. Align the front lip of the top cover so it will slide under the front panel
edge.
3. Push the top cover forward and down until all edges are evenly aligned on
the enclosure.
4. Turn the thumbscrews at the rear of the enclosure clockwise to tighten.
Figure 3-5. Replacing the Top Cover