HP Netserver LPr Installation Guide

Chapter 7 Installing Additional Boards
43
Slot 1
Slot 2
Slot 3
Figure 7-3. PCI Slots
NOTE For slot recommendations for specific PCI cards, see the
Readme file or Configuration Advisor on your HP NetServer
Navigator CD-ROM (for instructions see the "Configuring the
System" subsection in Chapter 1).
9. Use the T15 driver to remove the PCI slot cover for each slot to be used,
and store it for future use.
10. Use the T15 driver to remove the PCI retaining bracket and the screw
holding it.