HP Netserver LPr Installation Guide

1
Chapter 1 Setting Up the HP NetServer
LPr
Before You Begin
Read this chapter. Follow the steps described here.
Setup Steps
It is important that you follow the setup steps in the exact order shown below.
Skip any steps that do not apply to you. To provide further details, these steps
include references to other sections of this manual and to other documents.
Preparations
CAUTION The HP NetServer LPr weighs approximately 38 pounds. Use
appropriate lifting precautions when you move it. Be sure to
get help from another person when loading an LPr chassis
into the top of a rack.
Prepare Site
If you are setting up a new rack for the HP NetServer
LPr refer to the Rack Installation Road Map for
details on site preparation. For additional help on rack
site preparation see the world wide web at:
http://www.hp.com/go/enclosures
Refer to the site preparation checklist in the Rack
Cabling Reference for the HP NetServer LPr. This
document is shipped in the shipping box with this
installation guide.