HP Netserver LPr Installation Guide

Chapter 11 Configuring the NetServer LPr

◊ Select Yes for automated NOS installation. Perform an automated

NOS installation for first-time installation of Novell NetWare /

IntranetWare or Microsoft Windows NT Server on a factory-

configured NetServer. Automated NOS installation will guide you

through the NOS installation, set up the hard disk drive, and configure

your NOS with appropriate drivers for HP-bundled configurations.

This installation also loads the Local Support Tool onto Windows NT

or NetWare systems. The Local Support Tool is a stand-alone support

tool accessed directly from the NetServer. It gives you information to

help you manage the NetServer.

Automated NOS Installation: For certain versions of Novell NetWare /

IntranetWare or Microsoft Windows NT Server, Configuration

Assistant partitions and formats the hard disk drive, and Installation

Assistant guides you through the NOS installation and configures the

NOS with the appropriate drivers for the HP-bundled configuration.

◊ Select No for manual NOS installation. Perform a manual NOS

installation if

you are installing a NOS other than certain versions of

Novell NetWare / IntranetWare or Microsoft Windows NT Server, or

if you have replaced any HP components.

For Manual NOS Installation Only: Before you perform a manual

NOS installation, you must print instructions and manually create

NOS-specific drivers diskettes as follows:

◊ Create Drivers Diskette(s): On the Create Drivers Diskette(s)

screen, select Create Drivers Diskette(s) to create one or more

customized diskettes containing HP drivers and configuration files

to use when you install the NOS.

◊ Print and Read Instructions: On the Show NOS Installation

Instructions screen, select Save to Disk to copy the Network

Operating System Installation Instructions to disk. Then print

them out from the disk. Read the instructions first, and then follow

them to manually install the NOS.

• View Configuration Advisories: Read the configuration advisories and

print them if necessary. You can change your hardware at this time to

conform to the advisories.

• Configure Remote Management: This utility configures the Integrated

Remote Management device for remote management. It enables remote,

dial-up server management. To configure Integrated Remote Assistant,