HP Netserver LPr Installation Guide

Chapter 11 Configuring the NetServer LPr
84
Essential Steps
• Configure Remote Management. Executes Integrated Remote Assistant
configuration utility.
• Configure Disk Array. Configures your HP disk array. Before preceding,
fill out the Disk Array Configuration Worksheet. Click Help for more
details.
• Execute Card Utilities. Execute available configuration utilities for
installed cards.
• Create Drivers Diskette(s): SCSI IDE HP NetRaid Adapter and video
adapter drivers for MS Windows NT 4.0 on HP NetServer LPr.
Recommended Steps
• Update System BIOS. This utility will update the system BIOS. The utility
partition, if installed, will be updated.
• Install Utility Partition. Installs utility partition to the boot or system
drive. Not available under SCO Unix.
• Show System Information. Shows hardware inventory and system
resource (interrupts, I/O space) allocation.
• Show NOS Installation Instructions. Select this option to save a copy of
NOS installations to floppy and to print them out.
NOS Installation
The NOS installation process, whether automated or manual, is the same in
custom configuration mode as in Express configuration mode:
• For Manual NOS Installation Only: Before you perform a manual NOS
installation, you must manually create NOS-specific drivers diskettes and
print instructions, as follows:
◊ Create Drivers Diskette(s): On the Create Drivers Diskette(s) screen,
select Create Drivers Diskette(s) to create one or more customized
diskettes containing HP drivers and configuration files to use when
you install the NOS.
◊ Print and Read Instructions: You may already have done this directly
from the Custom Configuration menu option Show NOS Instructions.
If not, on the Show NOS Installation Instructions screen, select Save