HP Netserver LPr Installation Guide

Chapter 11 Configuring the NetServer LPr

Integrated Remote Assistant

Integrated Remote Assistant is a separate management controller built into the

HP NetServer LPr. It enables remote modem-based server management and

alerting through a pager for improved remote administration of your NetServer

LPr. Integrated Remote Assistant provides:

• Console redirection, independent of server state

• Access regardless of system state for troubleshooting and problem

resolution

• Pager notification of critical server events to alert you earlier to problems

• Access to the Event Log

• Server reset and power control

• Remote system BIOS update

• Password and dial-back security

• Remote management capabilities enhanced with pcANYWHERE-32,

providing full remote control of Microsoft Windows NT servers across the

network or over a modem connection

See the HP NetServer Remote Administrator Guide for details.

PcANYWHERE-32

pcANYWHERE-32 is remote-control graphics-redirection software from

Symantec Corporation that allows you to take control of Microsoft Windows NT

servers across the network or over a modem. Refer to the HP NetServer Online

Documentation CD-ROM for details, or the HP NetServer Remote

Administrator Guide.

NetServer Utilities

NetServer LPr Utilities displays a menu where you can directly execute utilities

such as the following:

• HP DiagTools Utility: An easy-to-use hardware diagnostic for system

verification, burn-in, and rapid troubleshooting. DiagTools is a floppy-

disk based tool. When you select DiagTools from the Utilities menu, you

are prompted to enter a floppy disk. DiagTools is then transferred from

the HP NetServer Navigator CD-ROM to the floppy.