HP Netserver LXr 8000 NetRAID-3Si Install. Guide

3
Cabinet
RAID arrays A RAID array (logical disk) must be composed of all the same disk model
(i.e., part number and suffix). Different size or speed disks are not allowed
in the same RAID array. Any combination of disk models is allowed on a
SCSI channel. Any combination of disk models is allowed in a cluster.
RAID arrays may not span NetRAID Adapters.
No. and mix of cabinets. 1 – 3, any mix of Rack Storage 12s and Rack Storage/8s.
Rack Storage/12:
Model D5989A plus 1 D6025A for each Rack Storage/12 (400/450 MHz)
D5989B plus 1 D6205B for each Rack Storage/12 (400/450 MHz)
D5989B plus 1 D6025B for each Rack Storage/12 (500/550 MHz)
Status SCSI ID 5 (fixed)
Disk SCSI Ids 0 – 4, 8 – 15 (fixed)
Disk drives: HP 4.2 GB Ultra SCSI Disk Module D6104A
HP 9.1 GB Ultra SCSI Disk Module D6106A
HP 9.1 GB Ultra SCSI Disk Module D6107A
HP 18.2 GB Ultra SCSI Disk Module D6108A
HP 18.2 GB (10k rpm) Ultra SCSI Disk Module D7031A
HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A
HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A
Cables Any 2 HP LVD SCSI cables from the following list:
1 meter D7131A
2.5 meter D6020A
5 meter D6982A
10 meter D6983A
Rack Storage/8
Model D4902A
Status SCSI ID 14, 15 (fixed)
Disk SCSI Ids 0 – 3, 8 – 11 (fixed)
Disk drives: HP 4.2 GB Ultra SCSI Disk Module D3583C
HP 4.2 GB (10k rpm) Ultra SCSI Disk Module D4903A
HP 9.1 GB Ultra SCSI Disk Module D4289A
HP 9.1 GB (10k rpm) Ultra SCSI Disk Module D6019A
HP 18.2 GB Ultra SCSI Disk Module D5039A
NOTE All disks in a Rack Storage/8 must be the same speed.
Cables Cluster Adapter Cable D5957A (2 required per cabinet)
NOTE If both channels 0 and 2 of the NetRAID Adapter are used, then
cable D7131A must be used with Cluster Adapter D5957A on both
channels.