Battery Backup Module Installation Guide

E. Replacing Cover 1 and Restarting the HP NetServer

CAUTION Replace all covers before operating the HP NetServer

for more than two minutes. Otherwise, damage to

system components may result from insufficient

airflow cooling.

Replace Cover 1, as described in the HP NetServer installation guide,

before restarting the HP NetServer.

F. Verifying that the BBM Is Charged

1. After AC power has been connected for 120 minutes, remove

Cover 1 to view the LEDs on the BBM. The red LED should be off,

and the green LED should be steadily on. This indicates that the

BBM is charged and is operating normally.

2. Replace Cover 1.