Battery Backup Module Installation Guide

17
Tools You Need
To install a BBM you will need an Antistatic Service Kit (3M part
number 8501/8502/8505 or equivalent) containing a wrist strap,
antistatic mat, and cable. Use this kit to prevent damage to the
system from static electricity.
Installation
A. Shutting Down, Disconnecting, and Extending the
NetServer from Rack
Do the following to prepare for installation:
1. Bring down the NetServer’s operating system properly to make
sure that cache memory has been flushed.
2. Turn the NetServer power off.
3. Disconnect the power cords.
CAUTION Be sure the HP NetServer is turned off and
disconnected from AC power before you remove or
install the BBM.