hp lp 2000r and ds2100 config guide - for Microsoft Windows 2000 A.S. Clusters PDF, 205K, 11/15/2001

LP2KR2K2M21
11/15/01 7
NOTES:
1. Color coding depicts the two
different cable types :
To connect server to DS2100 --
2.
3. Only connect channel 0 of
the NetRAID-2M to the DS2100.
Using channel 1 is not supported.
4. There are no ‘left’ or ‘right’ port
requirements for cabling to the
DS2100. Cables can be attached to
either port.
5. Connect LAN ports A for the
heartbeat cluster interconnect.
Use ports B for the client
LAN connection.
This diagram depicts using two
DS2100’s. You can use from
one to two storage cabinets per
cluster.
C7541A - 2 Meter ILT cable
C2978B- 0.5 Meter LVD cable
To connect DS2100’s together --
connect to
NetRAID-2M
channel 0 only!
LAN A
LAN A
LAN B
- Client LAN
LAN B
- Client LAN
Heartbeat
Connection
-crossover cable
or equivalent
Heartbeat
Connection
-crossover cable
or equivalent
A B C
A B C
SCSI Switch
SCSI Switch
6. Set the DS2100 SCSI ID switches
as shown.
- The following addresses will be
assigned to installed disks in the top
DS2100: 8, 10, 12, and 14.
- The following addresses will be
assigned to installed disks in the bottom
DS2100: 9, 11, 13, and 15.
B
C
×
×
HP Netserver LP 2000r Cluster using two HP Surestore DS2100 Disk Systems