HP NetRAID-4M Installation Guide

4-24
Hewlett-Packard NetRAID-4M Controller Installation Guide
b Copy the hpnraid driver file to /tmp by entering the
following command:
c Change your working directory to /tmp by entering the
following command:
cd /tmp
d Untar the file hpnraid.tar by entering the following
command:
tar -xvf hpnraid.tar
e Install the hpnraid driver by entering the following
command:
pkgadd -d /tmp hpnraid
f When prompted by the idbuild utility, answer Yes to both
questions.
g Run the driver configuration program by entering the
following commands:
cd /pkg/hpnraid/scripts
./drive_config
cp /mnt/cdrom/periph/nraidadp/openserv/driver/hpnraid.tar /tmp