HP NetRAID-4M Installation Guide

5-4
Hewlett-Packard NetRAID-4M Controller Installation Guide
can manage a NetWare controller remotely with FAST, if you have
FAST installed on an NT system, and establish a network connection
between the two systems.
Installing the Controller Management Software on NetWare
Follow these steps to install the Controller Management Software
for Novell NetWare 4.20 or 5.1:
Note: Ensure that the NetWare server is down and that you
are at the DOS prompt before beginning this installation.
1 When your NetWare server is at the DOS prompt, insert
Diskette #1.
2 You can either execute the program directly from the floppy, or
copy the nwapp_d1.exe executable to a local directory and
execute it from there.
a To copy the file from the floppy disk to a local directory,
type the following command:
copy a:\nwapp_d1.exe c:\[pathname]
where pathname is a directory on a local DOS partition.
Caution: Do not copy nwapp_d1.exe file to the
nwserver directory, since when the file is
uncompressed, you may overwrite files that should
not be overwritten.
b Type cd \[pathname] and press Enter.
3 Type nwapp_d1.exe and press Enter.
Answer Yes to uncompress the files.
4 Start the NetWare server.
5 At the NetWare console, type the following and press Enter:
load \[pathname]\hpnsetup
where pathname is the directory where you extracted the files.
!