HP NetRAID-4M Installation Guide

vii
Contents
6 Installing and Configuring the SNMP Subagent
7 Installing Clusters
Preliminary Hardware and Software Requirements for
Windows Clusters 7-1
Enabling Clustering in the BIOS and Setting the SCSI IDs 7-2
Overview of the Cluster Software Installation Procedure 7-3
Installing MSCS and the HP NetRAID-4M Cluster
Software 7-4
Moving Quorum to a Shared Container 7-6
Removing the HP NetRAID-4M Cluster Software 7-6
8 Understanding The Battery Subsystem
Initial Battery Charge 8-2
Battery Low Conditions 8-2
Normal Causes of a Battery Low Condition 8-2
Battery Reconditioning 8-3
Recovering Data from the Controller’s Cache 8-4
Determining if Data is in the Cache 8-5
Recovering Data from the Cache 8-5
A Using the BIOS SCSISelect and Disk Utilities
Starting the SCSISelect Utility A-2
Using SCSISelect Menus A-2
Exiting SCSISelect A-3
Using the Controller Configuration Utility A-3
Using the SCSI Configuration Utility A-4
SCSI Channel Interface Options A-4
SCSI Device Configuration Options A-5
Using the Disk Utilities A-6
B Using the BIOS Container Configuration Utility
Creating a Container B-2
Assigning Container Properties B-3