HP NetRAID-4M Installation Guide

A-1
A
Using the BIOS SCSISelect
and Disk Utilities
The SCSISelect Utility allows you to change SCSI device and
controller settings without opening the server chassis or handling
the card. The Disk Utilities allow you to low-level format or verify
the disk media of your SCSI hard disk drives.
The SCSISelect settings are listed in Table A-1.
Table A-1. SCSISelect Options
Controller Configuration Options Default
Drives Write Cache
1
Disabled
Runtime BIOS Enabled
Automatic Rebuild Enabled
Container Background Consistency check Enabled
NVRAM State Dirty/Clean
SCSI Channel Interface Options Default
Controller SCSI Channel ID 7
SCSI Parity Checking Enabled
Controller SCSI Channel Termination Auto Mode
Clustering Disabled
SCSI Device Configuration Options Default
Domain Validation Enabled