HP NetServer FCArray Assistant - Installation and User Guide

Chapter 1 Introduction
4
ensure a successful installation. The FCArray Assistant software is delivered on
the CD-ROM accompanying the hardware.
Server Hardware
• 2 MB of free hard disk space
• 3-½ inch floppy disk drive or CD-ROM drive for installing the FCArray
Assistant Server software
• Properly installed and configured FC Host Bus Adapter (FC HBA) with
the appropriate Windows NT drivers
• Network interface card (NIC) connected to a functioning network
Server Software
• An HP NetServer running Microsoft Windows NT 4.0 Server
• Latest Microsoft Windows NT 4.0 service pack (3.0 or greater)
• Appropriate network drivers for the installed network interface card
• TCP/IP stack installed
Client Hardware
• PC-compatible computer (includes Laptop or Notebook) with an Intel
80486
®
(or higher) class processor and at least 4 MB of system memory
(Pentium
®
processor and 16 MB of system memory are recommended)
• Network interface card (NIC) connected to a functioning network
• 3-½ inch floppy disk drive and/or a CD-ROM drive for installing the
FCArray Assistant Client software
• Fixed hard disk with at least 8 MB available free space (16 MB
recommended)
• Mouse or other pointing device