HP NetServer Installation Guide for the HP NetRAID-4M and Microsoft Cluster Services with Microsoft Windows NT Server 4.0 Enterprise Edition

HP NetRAID-4M Cluster Services Installation Guide Cluster Software Components and Quorum
24
Server A: Install HP NetRAID-4M Cluster Add-on Software
NOTE The HP NetRAID-4M cluster software contains a Hewlett-Packard extension to
the Microsoft Cluster Administrator utility (provided with the Microsoft Cluster
Service software). The Hewlett-Packard extension consists of a resource DLL and
an administrative DLL which enables use of Cluster Administrator, in addition to
FAST and the CLI (Command Line Interface), to manage shared storage.
20. Remove the Microsoft CD-ROM from the CD-ROM drive.
21. Insert the HP NetRAID-4M Cluster Setup diskette #1 in the floppy drive of Server A.
Navigate to the A:\ directory and double-click on: setup.exe.
Or
If the HP NetServer Navigator CD-ROM is used, go to path:
\\NSNavigator\periph\nraidadp\nt\cluster\setup.exe
22. Accept the defaults in the installation screens. For the type of installation, select the
Cluster Node option. Click Next.
23. When the HP NetRAID-4M Cluster software installation is complete, remove the
installation media from the drive. Click Finish.
24. Open the Cluster Administrator utility, Start > Programs > Administrative Tools >
Cluster Administrator.