HP Netserver LC 3 Quick Service Guide

3
Memory
There are four DIMM sockets on the system board for memory expansion Follow these simple rules when you plan to
install additional memory DIMMs:
• Use only HP DIMMs listed on the Technical Reference Label located inside the HP NetServer top cover,
in Information Assistant, or in Order Assistant.
• DIMMs can be 32 MB, 64 MB, or 128 MB in any combination.
• DIMMs can be installed in any order in any of the four DIMM sockets.
S
y
s
t
e
m
B
o
a
r
d
DIMM
DIMM Slot 0
Static dissipating work surface
Crosspiece must be OFF
of the work surface
DIMM Slot 1
DIMM Slot 2
DIMM Slot 3
Notches
Keys
Retaining Clips
DIM
M
CAUTIONOnly install DIMMs on a system board that is lying flat on a static-dissipating work surface.
Do not rock the DIMM into place, but apply firm and even pressure directly downward.
Video Memory
Expand video memory by installing two 256 K x 16 (512 KB), 70 Ns, 40-pin SOJ package DRAM ICs.
CAUTION Install the chip in the correct orientation. Failure to do so will destroy the DRAM..
Video
Slots