hp netserver lc2000 fc config guide - SPOF and SPOFless for Microsoft NT 4.0 Clusters

lc2000ntfc
12/20/01 2
Server Configuration
Parameter Specification
Clock speed 1 GHz
This certification covers any CPU rate within 500 MHz of the certified speed.
Number of CPUs Two
BIOS Ultra2 models—Version range 4.06.25 PV to 4.06.30 PV
Ultra3 models—Version 4.06.03 RM, or later
CPU cache Any size
RAM 128 MB, minimum. Must be HP.
Number of power
supplies
One standard, two required for redundancy
I/O slots Added cards may be installed in any appropriate slot, considering the server
default boot order provided below.
Default boot order IDE CD-ROM, FDD, embedded SCSI A, embedded SCSI B, PCI slot 1,
PCI slot 2, PCI slot 3, PCI slot 4, PCI slot 5, PCI slot 6
Local Storage
Controller Embedded SCSI, NetRAID-1Si, NetRAID-3Si, NetRAID-1M, or NetRAID-2M
For SPOFless configurations, configure drives in a RAID-1 mirror, or another
fault tolerant, hardware RAID level.
Driver For embedded SCSI on Ultra 2 models, sym_hi.sys, version 4.12, or later
For embedded SCSI on Ultra 3 models, sym_u3.sys, version 5.05, or later
For NetRAID-1Si/3Si, mraidnt.sys, version 2.24, or later
For NetRAID-1M/2M, mraidnt.sys, version 4.05, or later
(all drivers obtained from Navigator CD-ROM, version L.20.00, or later)
Physical drive location Server internal drive bays, or HP external drive cabinet
(e.g., HP Rack Storage/12)
Disk drives Must be HP
SCSI bus Any HP cables that meet SCSI specifications, and any SCSI bus speed
SCSI IDs Any
System software
Navigator CD-ROM Version L.19.00, or later
Operating system
Service pack
Microsoft Windows NT

Server 4.0 Enterprise Edition
SP6a
Power distribution
Layout Redundant power-distribution units (PDUs) are recommended. See power
cabling diagram on page 9.
Shared Storage Configuration
Parameter Specification
Controller
Model HP Fibre Channel Host Bus Adapter (HBA), Model D8602A or D8602B
Number of controllers One
Driver Afcnt4.sys, version 3.0.4107.0 (obtained from Navigator CD-ROM,
version M.04.00)