HP Netserver LH 3000 Installation Guide

Chapter 8 Installing the HP NetServer in the HP Rack System/E or Rack System/U
93
Attaching the Slides
The slides have mounting flanges at each end (see Figure 8-7). The mounting
flange is inserted between the column and the bar nut.
The slots in the mounting flange allow you to insert the flange in place behind the
outside face but in front of the bar nut.
The mounting flanges are then positioned behind the column face, but in front of
the bar nuts.
Mounting
Flanges
Insert the Mounting
Flanges between
each Column bar nut
and tighten the
screws.
Figure 8-7. Positioning the Slides