HP Netserver LH 3000 Installation Guide

Chapter 2 Controls, Ports, and Indicators
23
Green (Power) LED
Amber (Attention) LED
Onboard LEDs
Figure 2-8. Light Pipes Display PCI LEDs
Table 2-4. PCI Hot Plug LEDs
Amber Green Status Indicated Your Action
Off
On
Power to the slot is on, and
the slot is operating normally.
Do not remove the
board from the slot.
On
On
The slot needs attention, but
power to the slot is on.
Do not remove the
board from the slot.
On
Off The slot needs attention, and
power to the slot is off.
You can safely remove
the board from this slot.
Off Off Power to the slot is off. You can safely remove
the board from this slot.
For more information on PCI Hot Plug boards, see Chapter 6, "Installing
Additional PCI Boards," and Information Assistant on the HP NetServer Online
Documentation CD-ROM.
Power Supply LEDs
Interpret the green LEDs on the power supplies in this way:
Table 2-5. Power Supply LEDs
Green LED Indicates this NetServer Status:
Steady Green The system is powered up.
Flashing The system is in stand-by or power-save mode.
Off
The AC line is unplugged or the power supply
has failed (see Chapter 12, "Troubleshooting").