HP Netserver LH 4 NetRAID-3Si Installation Guide

2
System software:
Navigator version L.16.05 or later
Operating System Microsoft Windows NT Server 4.0, Enterprise Edition or later
Service pack SP5 or later
SPU
Model HP NetServer LH 4
Clock speed 400, 450, 500, 550 MHz.
No. of CPUs 2 - 4
BIOS version 4.06.13 PS or later (400, 450 MHz)
4.06.22 PS or later (500, 550 MHz)
CPU cache Any size
RAM 256 MB minimum. Must be HP.
No. of power supplies 3 required, 4 for redundancy
Local storage See
Local Storage below.
I/O slots: P1 – P3 Shared storage controller
P1 – P3 Local storage controller
P4 – Client LAN
P5 – Intra-cluster (Heartbeat) LAN
All others – Any other plug-in cards.
Storage
Local
Controller May use embedded SCSI or NetRAID-3Si in PCI slot P8 otherwise any
controller listed on the HP Tested Products List.
May not use embedded RAID, NetRAID-1, NetRAID-3, or NetRAID-1Si.
Cabinets (Physical drive
location)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Disk drives Must be HP (hot swap or fixed)
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed.
SCSI Ids Any
Shared
Controller
Model HP NetRAID 3si Adapter D5955A
No. of controllers 1
Firmware W.01.20 or later
BIOS B.01.10 or later
Driver 2.22 or later
NetRAID Assistant A.01.15 or later
SPU I/O slot P1 – P3
SCSI IDs 6, 7
Channels 0, 1, 2
RAID level 1, 5, 10, 50
Logical disks 1 per RAID array
8 maximum per NetRAID adapter