HP Netserver LH 4 Surestore E Config Guide for Windows NT4.0 Clusters
HP NetServer LH 4
with
A3700AB HP SureStore E 12H Disk Array
Cluster Configuration Guide
10 October 1999
(see Versions History at the end of this document)
Introduction
This document defines the supported HP NetServer LH 4 with A3700AB HP SureStore E 12H Disk Array
configurations for Microsoft Cluster Server. These configurations minimize single points of failure,
provide maximum availability, and have been certified by Hewlett-Packard and Microsoft. This guide is
prescriptive; it describes the configurations supported by HP. Any configuration not expressly allowed by
this guide will not be supported by HP.
Whatâs Defined in Cluster
Cluster
SPUs
Local and Shared Storage
Intra-cluster and Client LANs
Shared Storage Cabling
Cluster
Type of SPUs HP NetServer LH 4
Each node must be the same model SPU, but may have different size main
memory, cache, and CPU clock speeds.
Installation Pedestal or racked
Number of nodes 2
Shared Storage HP SureStore E 12 Disk Array and HP disks. See Shared Storage below.
LANs:
Client LAN Any NIC that is HP and Microsoft approved. See Client LAN below.
Intra-cluster
(Heartbeat) LAN
HP D5013A or J3171A only with crossover cable. See Intra-cluster LAN
below.
Power source Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.
System software: