HP Netserver LH 4r Rack Cabling Guide

Chapter 3 Cabling Reference Information
49
Power and Current for Estimating Supply Needs
Table 3-4. 100 VAC Power and Current: Approximate Current
Requirements of Rack Optimized Devices and Components
Device
(Notes 1, 2, 3)
Input
Power
(VA)
Input
Power (W)
100v
IRMS
(Amps)
HP NetServer LPr 530 305 5.3
HP NetServer LXr 8000
- - Not Supported
HP NetServer LH 4r 1170 1140 11.7
HP NetServer LH 3r 650 626 6.3
HP NetServer LXr Pro8
- - Not Supported
HP NetServer LXr Pro 450 446 4.5
HP Rack Storage/12 548 537 5.5
HP Rack Storage/8 211 209 2.1
Monitor (14-inch.) 125 88 1.3
Monitor (15-21-inch.) 200 140 1.4
DLT Library 140 98 1.4
DLT Mechanism 50 35 0.5
HP SureStore
Autoloader 418
214 150 2.1
DAT 24x6e 16 11.2 0.2
DAT 24e 6 4.2 0.1
Console Switch 42 29 0.4
Note 1 Indicated current ratings are approximate, for use in selecting PDU and UPS
components, and may not reflect actual measured amounts.
Note 2 For a full list of power ratings, see the rack configuration utilities (for instance,
Rack Assistant) on the HP Web Site.
Note 3 Ratings from previously published estimates are updated.