HP Netserver LH 4r Rack Cabling Guide

Chapter 3 Cabling Reference Information
51
Table 3-6. 200/208 VAC Power and Current: Approximate Current
Requirements of Rack Optimized Devices and Components
Device
(Notes 1, 2, 3)
Input
Power
(VA)
Input
Power (W)
200/208v
IRMS
(Amps)
HP NetServer LPr 640 285 3.2
HP NetServer LXr 8000 1121 1077 5.6
HP NetServer LH 4r 1130 1100 5.7
HP NetServer LH 3r 650 626 3.2
HP NetServer LXr Pro8 980 970 4.9
HP NetServer LXr Pro 450 446 2.3
HP Rack Storage/12 548 537 2.6
HP Rack Storage/8 211 209 1.1
Monitor (14-inch.) 125 88 0.6
Monitor (15-21-inch.) 200 140 0.7
DLT Library 140 98 0.7
DLT Mechanism 50 35 0.3
HP SureStore
Autoloader 418
214 150 1.1
DAT 24x6e 16 11.2 0.1
DAT 24e 6 4.2 *
Console Switch 42 29 0.2
* Indicates less than 0.1 amp rating
Note 1 Indicated current ratings are approximate, for use in selecting PDU and UPS
components, and may not reflect actual measured amounts.
Note 2 For a full list of power ratings, see the rack configuration utilities (for instance,
Rack Assistant) on the HP Web Site.
Note 3 Ratings from previously published estimates are updated.