HP Netserver LH Pro AutoRAID Install Guide

1
HP NetServer LH Pro
with
A3700AB HP AutoRAID Disk Array Model 12H
Cluster Configuration Guide
August 1, 1998
Introduction
This document defines the supported HP NetServer LH Pro and A3700AB HP AutoRAID Disk Array
Model 12H (LH Pro/AutoRAID 12H) configurations for Microsoft Cluster Server. These configurations
minimize single points of failure, provide maximum availability, and have been certified by Hewlett-
Packard and Microsoft. This guide is prescriptive; it describes the configurations supported by HP. Any
configuration not expressly allowed by this guide will not be supported by HP.
What’s Defined
•
Cluster
•
SPUs
•
LANs
•
Local Storage
•
Shared Storage
•
Shared Storage Cabling
Cluster
Type of SPUs HP NetServer LH Pro 6/200 Model 1
Each node must be the same model SPU, but may have different
size main memory and cache.
Number of nodes 2
Shared Storage See Shared Storage below.
LANs:
Client LAN See Client LAN below.
Intra-cluster See Intra-cluster LAN below.
Power source Direct from power mains, power conditioner or uninterruptable
power supply (UPS) using any power conditioner or UPS.
System software:
Navigator version G.00.85 or later
Operating System Microsoft Windows NT Server 4.0, Enterprise Edition or later.
Service pack SP3 and hotfix “clusfixi” or later