HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) Installation Sheet

Pins
Spring
Latch
Opening the HP Netserver
Familiarize Yourself
Power
Mouse
Parallel
LAN A/
MGMT
LAN B
PCI Slot (1)
Keyboard
USB (2)
Serial A/
MGMT
Video
External
SCSI Connector
CAUTION) Do not use high voltage differential (HVD) SCSI 
  devices in this Netserver or you will damage the 
  devices.
Front of HP Netserver
Bezel Removed
CD-ROM
LED Indicators
Flexible Disk Drive
SCSI Drive (ID 0)
SCSI Drive (ID 1)
SCSI Drive (ID 2)
Reset Switch
Temperature
Fans
Disk 0
Disk 1
Disk 2
SCSI Activity
Power Switch
Power LED
WARNING) Before removing the cover, always disconnect the 
  power cord and remove any telephone cables.
  Disconnect the power cord to avoid exposure to high 
  energy levels that may cause burns when parts are 
  short-circuited by metal to objects such as tools or 
  jewelry. Disconnect telephone cables to avoid  
  exposure to shock hazard from telephone ringing 
  voltages.  
Installing Mass Storage Devices
Primary Processor
Secondary Processor
DIMMs
PCI Connection Slot
(riser board not
shown)
IDE-1
IDE-2
SCSI A
SCSI B
FDD
Daughter Board
(Integrated RA)