HP Netserver LPr FC Windows 2000 Config Guide for Windows 2000 Advanced Server Clusters

1 meter D7131A

2.5 meter D6020A

5 meter D6982A

10 meter D6983A

LANs

Intra-cluster (Heartbeat) LAN Client LAN

LAN connection HP D5954A crossover cable or

equivalent

Any LAN

The intra-cluster LAN may only be

used for cluster node communication

via a crossover cable or VLAN. It

may not be used for client

communication.

NIC:

Model HP D5013A/B (10/100TX PCI) Any that is on both the HP Tested

Products List and the Microsoft

Hardware Compatibility List.

For SPOFless, use D5013A or B

Driver Hptxnt5.sys 4.01.67 (supplied with

Microsoft Windows 2000 Advanced

Server CD) or later.

For SPOFless, use hptxnt5.sys

version 4.2.27.0 (Navigator

L.18.4.05) or later.

Vendor supported driver.

NOTE If the Client and Intra-

cluster LANs are the same model

(D5013A/B) the Client LAN

must use the same driver as the

Intra-cluster LAN.

No. of NICs 1 1

Shared Storage Cabling

This part of the guide defines the allowable cabling configurations for clusters using the HP NetServer

LPr and one required HP Rack Storage/12FC and one or two optional HP Rack Storage/12s. Only these cabling

configurations and these cables are supported.