HP Netserver LPr Pentium III 650 MHz and Higher

HP Part Number 5969-5957 '"&#&("&"$'
Printed in January 2000
Errata: Supporting HP NetServer LPr Pentium III
650 MHz and Higher
If you are using the HP NetServer LPr with Intel Pentium III 650-MHz or higher CPU, you will need the following
items for support:
1. BIOS version must be 40630 (version 30) or later. You can download this BIOS from the web at
http://netserver.hp.com/netserver/ or from the Navigator CD version L18.XX or higher.
2. VRMs must be 8.4 and 5 volts. VRM 8.3 is not supported. HP part number: 0950-3633.
This VRM can also be identified with the following part numbers:
•
Delta part number 05s2020U1 Rev: X0
•
VXI part number: 073-20770-1 Rev: A
3. Motherboard part numbers must be one of the following :
•
D6129-68004
•
D6129-63008
•
D6129-69008
NOTE If you purchased a HP NetServer LPr system with a 650-MHz or higher speed, you already have
all the components listed above. If you have a HP NetServer LPr 600-MHz or lower, you can not
upgrade to the higher processor speeds, as this is not supported.
Please contact your sales representative for more information.