2002

lt6000rnt4m

1/28/02 3

Shared Storage Configuration

Parameter Specification

NetRAID-4M FAST Ultra2 models — Version 2.4-0, or later

(software obtained from Navigator CD-ROM, version L.20.00, or later)

Ultra3 models — Version 2.4-1, displayed in FAST as version 4605, or later

(software obtained from Navigator CD-ROM, version M.04.00, or later)

SCSI ID 6, 7

Channels 0, 1, 2, 3

RAID levels All fault-tolerant RAID types supported by controller: 1, 5, 10 (stripe set of

mirror sets RAID 0/1), 50 (stripe set of RAID-5 sets), volume set of mirror sets,

volume set of RAID-5 sets

Containers Single-level or multi-level

Must be fault-tolerant

Eight, maximum, per cluster

Configuration options Write cache disabled

Clustering enabled

Domain validation enabled

Enclosure

Disk drives Any HP drive supported by storage enclosure. Any combination of HP disk

models is allowed in a diskset, on a SCSI channel, or in a cluster.

Number of cabinets Up to eight

Model Rack Storage/12 D5989B, containing two D6025B SCSI controller cards, or

Rack Storage/12 D5989C, containing two D6025C SCSI controller cards

Status SCSI ID 5 (fixed)

Disk SCSI IDs 0–3, 8–15 (fixed)

Cables

SCSI Any two HP LVD SCSI offset cables per RS/12 from the following list:

1 meter D7131A

2.5 meter D6020A

5 meter D6982A

10 meter D6983A

See SCSI cabling diagram on page 5.

Power distribution

Layout Redundant power distribution units (PDUs) are recommended. See power cabling

diagram on page 6.

Microsoft



and HP Certified Server Configuration

Parameter Specification

I/O card slot PCI slot 5, NetRAID-4M shared storage controller

Network interfaces PCI slot 2, model D5013B, client LAN

Boot device Embedded DAC