HP Netserver LT 6000r Rack Cabling Guide

Chapter 3 Procedure for Connecting and Routing Cables to the LT 6000r
35
Rack Storage/12
Dashed Lines Indicate Dual Bus
Configured Storage
HP NetServer
LT 6000r
Figure 3-1. Overview of Data Cabling of the HP NetServer LT 6000r to an
HP Rack Storage/12
NOTE Figure 3-1 shows an HP Console Switch, which is not
necessary for configuring the system, but is shown for
informational purposes.
NOTE The configuration in Figure 3-1 requires 1 UPS and 1 PDU at
120 V, 200/208 V, and at 220/230/240 V.
For 100 VAC applications, a 3000 VA UPS is required and 2
PDUs must be in place.