HP Netserver LT 6000r Third-Party Racks

Chapter 1 Rack Mounting the HP NetServer

• Maintain reliable grounding of rack-mounted equipment. Pay particular

attention to supply connections that are not direct connections to the

branch circuit (for example: power strips).

HP Net Server Rack-Mount Parts List

Make sure that the rack-mount kit that comes with your HP NetServer LT 6000r

contains with the following parts.

Quantity

Part

2 Slides

1 Template

Definition of Terms

Terms used in this document are defined in the table below.

Term

Definition

Bezel A removable plastic face panel that covers entire front of

the HP NetServer.

Control Panel Display and buttons used to view HP NetServer status and

change system parameters.

EIA unit Industry standard measurement (1.75 in / 44.45 mm),

consisting of three vertical mounting holes in a rack

column.

Cage nut Single nut designed to clip behind the rack column and

accept a screw through the hole in the column.

Rack (rack cabinet,

rack enclosure)

The equipment enclosure in which the HP NetServer will

be installed. This document covers installation in third-

party racks.

Slide Extendible side bracket (attached to the rack chassis

columns) on which the HP NetServer is mounted.

Slide mounting flange Mounting flange located at either end of the slide.