HP Netserver LXe Pro Installation Road Map

1. Verify Contents
2. Obtain HP NetServer Navigator CD-ROM Release History
3. Connect Monitor, Keyboard and Mouse
4. View the Readme File
5. Remove the Cover
6. Install Additional Memory
7. Install Additional PCI Boards and EISA Boards
8. Install Additional Mass Storage Devices
9. Replace all Covers and Connect Cables
10. Configure the HP NetServer and Install Additional ISA
Boards
11. Troubleshooting
Audience Assumptions
This Road Map is for the person who installs, administers, and
troubleshoots LAN servers. Hewlett-Packard Company assumes
that you are qualified in the servicing of computer equipment and
trained in recognizing hazards in products with hazardous energy
materials.
Side Cover and Front Bezel Removal
Mouse
Keyboard
Serial
Monitor
Parallel
Power on Switch
Reset
Switch
Disk Access LED
Keyboard Lock
Switch
Power Supply LED
Fan LED
NetServer
Status LCD
Front Panel Key Lock
Front Panel Key Lock
(unlocks top cover)
Front Panel
LXe Pro Installation Road Map
Table of Contents
Overview of LXe Pro Features
Back of NetServer
Hot Swap Drive Keylock
Front Panel Key Lock
Ports
NetServer Keylocks
(one key is used for all locks)
Front Wheel Locking
Front Wheel in Unlocked
Position
Front Wheel in Locked Position
(1)
(2)
(3)
Front Skirts
Server Skirts
(1)
(2)
(3)
(4)
Front Door Key Lock
Rear Skirts