HP Netserver LXr 8000 Installation Guide

Chapter 12 Troubleshooting
110
◊ List of Error Messages and Beep Error Messages
• The HP NetServer Navigator CD-ROM contains HP NetServer Utilities:
At the HP NetServer Navigator Main Menu, select "Access NetServer
Utilities" to use the following tools:
◊ HP DiagTools Utility: An easy-to-use hardware diagnostic for system
verification, burn-in, and rapid troubleshooting. DiagTools is a floppy-
disk based tool. When you select DiagTool from the utilities menu,
you are prompted to enter a floppy disk. DiagTools is then transferred
from the Navigator CD-ROM to the floppy.
◊ Error Message Utility: Lets you view descriptions of errors that
occur during the Power-On Self Test (POST) and tells you how to
handle the errors.
◊ Event Log Report Utility: Describes server management events and
lets you review a list of errors and other system events.
◊ More NetServer Utilities>>Diskette Library: Enables you to
conveniently generate any flexible diskette available on the HP
NetServer Navigator CD-ROM. For example, you can create the
following diskettes: BIOS Update, NOS Drivers, and DiagTools.
• For problems with hard disk drives, refer to the HP NetServer Hard Disk
Drive Troubleshooting Guide.
• For problems with the network interface controller board (NIC), refer to
its documentation in Information Assistant.
• For problems with the disk array controller board, if you have one, refer to
the HP NetRAID Series User Guide for HP NetRAID and HP NetRAID-1
in Information Assistant.
• For problems with HP TopTools, refer to the HP TopTools Administrator
Guide on the HP Web Site at
http://www.hp.com/toptools .
• For general information on management products, refer to
http://www.hp.com/go/netserver
and search for "management."