HP Netserver LXr 8000 Installation Guide

Chapter 2 Controls, Indicators, and Ports
13
Communication Ports
Figure 2-7 identifies the ports on the HP NetServer’s rear panel.
External
SCSI Port
Keyboard
Mouse
Com1
Com2
VGA
LPT1
Not Used
Figure 2-7. Rear Panel Ports
PCI Hot Plug Slot LEDs
Slots P7 through P10 on the I/O baseboard are 64-bit PCI slots that can be
individually powered down through system software. This feature allows
replacement of individual boards without powering down the entire server.
These four PCI Hot Plug slots each have two LEDs. The LEDs are on the I/O
baseboard, but you can see them through the server’s rear panel. (You can also
see the LEDs by removing the PCI Hot Plug access panel on the top of the
machine. (See Chapter 3 for details.)
On each slot, one LED lights green, and the other lights amber. The green LED
indicates whether power to the slot is on or off. The amber LED indicates
whether the slot needs attention. Table 2-4 shows how to interpret the LEDs.