HP Netserver LXr 8000 Installation Guide

33
5 Installing Additional Memory
Introduction
This chapter includes guidelines and instructions for:
• Removing and reinstalling a HP NetServer LXr Pro 8000 memory board
for a memory upgrade
• Installing DIMMs in the specified configurations on the memory board
• Removing DIMMs and downsizing the memory configuration
Figure 5-1. Memory Board and DIMM
Tools Required
These tools are required for removal and installation of accessories:
• Torx T-15 driver
• An anti-static service kit (3M 8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.