HP Netserver LXr 8000 Installation Guide

Chapter 8 Mounting the Server in the Rack
79
3. Slide the rack nuts onto the column where indicated on the template. (See
Figure 8-2.) If you don’t have the template, Figure 8-3 shows rack nut
placement for the front columns.
Figure 8-2. Placing Rack Nuts on Rack Columns
Bottom of
Server
Fourth Hole
From Bottom
Sixth Hole
From Bottom
Ninth Hole
From Bottom
Seventeenth
Hole From
Bottom
Attachnutstothisface
of the left-front and
right-front columns
Right
Left
#
#
#
#
#
" #" represents
the EIA unit
numbers on the
rack columns
Front of
Rack
Figure 8-3. Rack Nut Locations on the Rack’s Front Columns
4. Attach rack nuts to the outside face of the other front rack column. (See
steps 2 and 3.)
5. Turn the template over and use it to mount rack nuts on the left-rear and
right-rear rack columns. Again, the template shows you where to place the
nuts. If you don’t have the template, Figure 8-4 shows rack nut placement
for the two rear rack columns.