HP Netserver LXr 8000 Installation Guide

Chapter 8 Mounting the Server in the Rack
87
1. Push hinge
against front
of server
2. Insert hooks into
matching holes
on front of server
3. Swing hinge open
(to the left)
Figure 8-11. Pressing the Bezel Hinge onto the Front of the HP NetServer
2. Swing the hinge open, to the left. See Figure 8-11.
3. Looking through the open side of the hinge, you see three raised holes for
screws. These align with holes on the server itself. Insert screws into these
three holes and hand-tighten them. See Figure 8-12.