HP Netserver LXr 8000 Installation Guide

Chapter 8 Mounting the Server in the Rack
88
1. Insert screws into
holes through open
side of hinge
Hinge in
open position
3. To tighten screws,
insert driver through
access holes in top
of hinge.
Hinge in
closed position
2. Swing hinge closed
(to the right)
Figure 8-12. Fastening the Bezel Hinge to the Chassis
4. Swing the hinge closed. Use the access holes in the top of the hinge to
insert a driver and finish tightening the three screws.