HP Netserver LXr 8000 PCI Hot Plug Replacement

Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide
8
9. Determine which covers to remove from the NetServer.
◊ If installing a board in slots P7-P10 only, lift off the hot-plug access panel covering these slots.
See Figure 6-4.
◊ If installing a board in slots P1-P6, you must remove the Top Cover and the Shield. See Figure 6-4.
Top Cover
Hot Plug
Access Panel
Shield
Figure 6-4. NetServer LXr 8000 Covers