HP Netserver LXr 8000 PCI Hot Plug Replacement

Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide
11
Press in the release latch on
each slide and push the
server into the rack
Flanges
Figure 6-7. Sliding the NetServer Back into the Rack
22. Reconnect any cables you may have removed, including cables to the accessory boards, before continuing.
23. If all installation work is complete, return power to the NetServer according to the respective NOS power up
instructions.
24. Use the respective NOS software utility to ensure the correct software drivers for the PCI board are loaded.
25. Restore the NetServer to normal operation.