HP Netserver LXr 8000 PCI Hot Plug Replacement

Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide
16
Figure 6-12. Pop-up Menu
4. Confirm your selection by clicking Yes.
As soon as confirmation is complete, the Power LED (left) on the Utility screen turns off (gray) and the slot
status changes from Normal to Not Ready. The corresponding green LED on the I/O Baseboard turns off.
This means power to this slot is turned off. See Figure 6-13.
CAUTION If the LED for the desired hot-plug slot does not turn off, do not attempt to remove the PCI Hot-
Plug board. Return to Step 1 in this procedure to ensure you have selected the correct slot to
power down.