HP Netserver LXr 8000 PCI Hot Plug Replacement

Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide
22
13. Grasp the edge of the PCI board firmly and pull upward. See Figure 6-17.
Try to pull the board straight up without wiggling it side to side along the length of the board.
Accessory
Board
Bracket
Figure 6-17. Removing PCI Boards
14. Refer to the section in this chapter, "Replacing a PCI Hot-Plug Board," to install a new or replacement but
identical PCI Hot-Plug board in the PCI Hot-Plug slot.