Manualshelf

HP Netserver LXr 8000 PCI Hot Plug Replacement

ManualsBrandsHP ManualsServerHP NetServer LH 4/LH 4r
21222324252627282930
Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide
26
Figure 6-20. Pop-up Menu
4. Confirm your selection by clicking Yes.
The pop-up prompt should disappear and the Power LED (left) for the slot (slot 9) should turn green and after
a few seconds the status should change from Not Ready to Normal. See Figure 6-21.
5. If the Power LED (left) turns green, wait several seconds for the software driver to initialize the PCI board
and then observe the Attention LED (right) and the board status.