HP Netserver LXr 8000 PCI Hot Plug Replacement

Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide
29
CAUTION To prevent damage to cables, or a disruption in service due to a disconnection of cables, use
caution when sliding the chassis into the rack.
12. If chassis work is complete, slide the NetServer chassis back into the rack. See Figure 6-23.
Press in the release latch on
each slide and push the
server into the rack
Flanges
Figure 6-23. Siding the NetServer Back into the Rack
13. Reconnect any cables you may have removed, including cables to the accessory boards, before continuing.
14. Insert the screws and use a T-25 driver to secure the flanges to the front columns of the rack.
15. Re-install the bezel to the front of the NetServer.
16. Return the NetServer to normal operation.