HP Netserver LXr 8000 Rack Cabling Guide

Chapter 2 Connecting and Routing Cables to the HP NetServer LXr 8000
18
Figure 2-2. Three PDU Configurations
The 208-240 VAC, wide-voltage-range-rated, switchless version of the Power
Distribution Unit (PDU) can be mounted in several configurations with the LXr
8000. One of these configurations is shown in Figure 2-3 below. Others are listed
in Table 3-2 and discussed in Chapter 3.
How to Position the PDU
Count the receptacles needed for each unit in the rack, notice where the PDUs
can be most conveniently located, and decide whether to orient the PDU
vertically or horizontally.