HP Netserver LXr 8000 Rack Cabling Guide

Index
48
due to cable length, 45
power cabling, 25
illustration of rack receptacles, 27
procedure, 25
Power Distribution Unit
208 VAC illustration, 30
208 VAC, LXr 8000 configuration,
28
208/240 VAC, 10 amp extension, 16
208/240 VAC, 16 amp, 16
230/240 VAC illustration, 31, 33
configuration guidelines, 42
configurations for LXr 8000, 18
determining and balancing load on
double PDUs, 26
how to mount the PDU, 16
models, illustration, 18
mounting limitations, 20
mounting the model vertically, 21
mounting the unit horizontally, 20
placement for the LXr 8000 rack, 17
position in the rack, 18
power off sequence, 39
power strip. See Power Distribution
Unit
power up
minimizing current inrush, 9
power up sequence, 38
R
rack assembly
assemble enclosure, 4
cabling overview, 23
cabling summary, 7
configuration planning, 6
doors and side panels, 8
mount door hinge and latch first, 5
mounting units, 6
preparation, 2, 3
procedure, 6
site preparation, 2
tying two racks together, 5
unpacking the rack, 3
verify and unpack shipment, 2
rack layout, 6
rack power configurations
208 VAC PDU, 29
230/240 VAC, 32
plugs and receptacles, 41
S
safety
anti tip foot use, 3
anti-tip features, 4
care in lifting units, 2
electrical ground, 21, 22
electrical ground connection for the
rack, 9
electrical shock prevention, 9
electrostatic damage (ESD)
prevention, 9
extend one unit at a time, 4
leveler feet, 3
lifting precautions, 3
moving racks safely, 3
preventing component damage, 9
rack cabling, 8
rear latch removal, 5
remove power supplies and disk
packs, 4
use attached rack mounting handles,
4
SCSI cables
illustration of LXr 8000 connections,
24
shipment to a second location
packaging materials, 2
remove and save shipping panels, 4
side panels
removal of, 5
site preparation, 12
checklist, 13
summary, 2