HP Netserver LXr 8000 to LXr 8500 Upgrade Guide

Chapter 3 Disassembling the LXr 8000
24
14. Open the latches to
disengage both memory
boards and remove.
Figure 3-5. Remove Memory Boards
14. Disengage each memory board by pulling the latches toward the edges of
the board, then remove. (See Figure 3-5.)
Place the memory boards on an anti-static mat. The memory boards and
their EDO DIMMs will not be reused in the LXr 8500.
WARNING Do not move the EDO DIMMs from the LXr 8000 into the
memory boards for the LXr 8500. Do not use the memory
boards from the LXr 8000 in the NetServer LXr 8500.