HP Netserver LXr 8000 to LXr 8500 Upgrade Guide

Chapter 3 Disassembling the LXr 8000
32
30. Remove four screws,
tilt midplane board, and remove.
Figure 3-13. Remove Midplane Board
30. Remove the midplane board as follows (see Figure 3-13):
a. Remove the four screws that attach the midplane board to the chassis.
b. Tilt the midplane board away from the sheet metal and lift.
Place the midplane board on the table of items that will not be reused in the
NetServer LXr 8500.